This is a test version of Biostars. For the public version, visit https://www.biostars.org.
Unexpected behavior of `vg surject`

Hi,

I am observing very different surjections for the same read in two versions of vg: 1.46 and 1.62. The behavior in 1.46 seems to me more logical, I would appreciate if someone knows the difference in surject behavior between the two versions and how to recover the behavior of 1.46.

Specifically, I am aligning the following read:

@HC_chr1:38618538_0
GAGGTCAGGAGTTCGAGACCAGCCTGACCAACTGGAGAAACCCCGTCTCTACTAAAAATACAAAATTAGCCGGGCGTGATGGTACATGCCTGTAATCCCAGCTACTCGGGGGGGCTGAGGCAGGAGAATCACTTGAACCTGGGAGGCGGAGGTTGCGGTGAGCTG
AAATCGCACCATTGCAC
+
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBB

in 1.46 I use the following command for mapping

vg giraffe \
        --progress \
        --sample sample \
        --output-format gaf \
        -f sample.fq \
        -Z hprc-v1.0-mc-chm13-minaf.0.1.gbz \
        -d hprc-v1.0-mc-chm13-minaf.0.1.dist \
        -m hprc-v1.0-mc-chm13-minaf.0.1.min \
        -t 1

in 1.62:

vg giraffe --progress --sample 030945_assembly_vg_realigned \
-f /241205/sample.fq \
--output-format gaf \
-Z /data/Runs/genomes/broad-references/hg38/v0/giraffe_index_1.1_af/hprc-v1.1-mc-grch38.d9.gbz \
-d /data/Runs/genomes/broad-references/hg38/v0/giraffe_index_1.1_af/hprc-v1.1-mc-grch38.d9.dist \
-m /data/Runs/genomes/broad-references/hg38/v0/giraffe_index_1.1_af/hprc-v1.1-mc-grch38.d9.min \
-t 1

The GAF files that I receive in the two cases are, as far as I understand, very similar:

1.46
HC_chr1:38618538_0  182 0   182 +   >2118432>2118433>2118434>2118451    239 17  198 182 182 60  AS:i:192    bq:Z:BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB cs:Z::182   dv:f:0

1.62
HC_chr1:38618538_0  182 0   182 +   >466858>466859>466860>466877    233 17  199 182 182 60  AS:i:192    bq:Z:BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB cs:Z::182   dv:f:0

However, when I am running vg surject to project on hg38, I get different results:

1.46
HC_chr1:38618538_0  0   GRCh38.chr1 38618438    60  114M1604D68M    *   0   0   GAGGTCAGGAGTTCGAGACCAGCCTGACCAACTGGAGAAACCCCGTCTCTACTAAAAATACAAAATTAGCCGGGCGTGATGGTACATGCCTGTAATCCCAGCTACTCGGGGGGGCTGAGGCAGGAGAATCACTTGAACCTGGGAGGCGGAGGTTGCGGTGAGCTGAAATCGCACCATTGCAC  BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB

1.62
HC_chr1:38618538_0  0   GRCh38#0#chr1   38618438    60  163M19S *   0   0   GAGGTCAGGAGTTCGAGACCAGCCTGACCAACTGGAGAAACCCCGTCTCTACTAAAAATACAAAATTAGCCGGGCGTGATGGTACATGCCTGTAATCCCAGCTACTCGGGGGGGCTGAGGCAGGAGAATCACTTGAACCTGGGAGGCGGAGGTTGCGGTGAGCTGAAATCGCACCATTGCAC  BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB  AS:i:158

I am using the same vg surject command as far as I understand.

The first alignment makes more sense to me since the read spans a common deletion (1604D) in the population, whereas in 1.62 surjection is not able to recover it.

Thank you all for the help!

Ilya

```

surject vg
• 1,017 views • link
written by Ilya • Ilya

You are also using different graphs with vg 1.46 and 1.62. The graph you use with vg 1.46 is a v1.0 graph built around CHM13, while the graph you use with 1.62 is a v1.1 graph built around GRCh38.

What happens if you surject the alignments from vg 1.46 using vg 1.62? And the other way around?

• 0 views • link
written by Jouni Sirén Jouni Sirén

Thanks Jouni Sirén , that was a very informative one. Now I think I am convinced that this is just the difference between vg surject in the two versions of vg and the change occurred between versions 1.47 and 1.48.

Here is the logic:

For consistency I aligned the same read

@HC_chr1:38618538_0
GAGGTCAGGAGTTCGAGACCAGCCTGACCAACTGGAGAAACCCCGTCTCTACTAAAAATACAAAATTAGCCGGGCGTGATGGTACATGCCTGTAATCCCAGCTACTCGGGGGGGCTGAGGCAGGAGAATCACTTGAACCTGGGAGGCGGAGGTTGCGGTGAGCTG
AAATCGCACCATTGCAC
+
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
BBBBBBBBBBBBBBBBB

using v1.62 and a graph hprc-v1.1-mc-chm13.d9.gbz.

with this command:

vg giraffe --progress --sample 030945_assembly_vg_realigned \
-f /241205/sample.fq \
--output-format gaf \
-Z hprc-v1.1-mc-chm13.d9.gbz \
-d hprc-v1.1-mc-chm13.d9.dist \
-m hprc-v1.1-mc-chm13.d9.min \
-t 1

and performed vg surject with 1.62 and 1.46 with this command:

vg surject \
    -x hprc-v1.1-mc-chm13.d9.gbz \
    -F /241205/paths_list.chm13.d9.txt \
    -s /241205/sample.1.1.chm13.gaf -G

With 1.46 I get the good alignment:

HC_chr1:38618538_0  0   GRCh38#0#chr1   38618438    60  126M1604D56M    *   0   0   GAGGTCAGGAGTTCGAGACCAGCCTGACCAACTGGAGAAACCCCGTCTCTACTAAAAATACAAAATTAGCCGGGCGTGATGGTACATGCCTGTAATCCCAGCTACTCGGGGGGGCTGAGGCAGGAGAATCACTTGAACCTGGGAGGCGGAGGTTGCGGTGAGCTGAAATCGCACCATTGCAC  BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB

While with 1.62 I get the following less useful alignment:

HC_chr1:38618538_0  0   GRCh38#0#chr1   38618438    60  163M19S *   0   0   GAGGTCAGGAGTTCGAGACCAGCCTGACCAACTGGAGAAACCCCGTCTCTACTAAAAATACAAAATTAGCCGGGCGTGATGGTACATGCCTGTAATCCCAGCTACTCGGGGGGGCTGAGGCAGGAGAATCACTTGAACCTGGGAGGCGGAGGTTGCGGTGAGCTGAAATCGCACCATTGCAC  BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB  AS:i:158

I get the same behavior when aligning to the v1.0 graph. 1.46 produces good surjection 1.62 - not so much. Playing with versions, I see that the change occured between version 1.47 and 1.48.

Would be happy to hear suggestions since the old behavior was useful in some cases!

Thanks,

Ilya

• 0 views • link
written by Ilya • Ilya

0 answers

No answers yet.

Log in to answer this question.

More posts like this