This is a test version of Biostars. For the public version, visit https://www.biostars.org.
error related to vcfstats

Hello everyone,

I am trying to use vcfstats tool.

I am writing the following command but its showing error:

vcfstats -h

the error:

Traceback (most recent call last):
  File "/opt/ohpc/pub/libs/gnu8/numpy/1.15.3/lib64/python3.4/site-packages/numpy/core/__init__.py", line 16, in <module>
    from . import multiarray
ImportError: cannot import name 'multiarray' from partially initialized module 'numpy.core' (most likely due to a circular import) (/opt/ohpc/pub/libs/gnu8/numpy/1.15.3/lib64/python3.4/site-packages/numpy/core/__init__.py)

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/anaconda3/bin/vcfstats", line 5, in <module>
    from vcfstats import main
  File "/home/anaconda3/lib/python3.8/site-packages/vcfstats/__init__.py", line 9, in <module>
    from cyvcf2 import VCF
  File "/home/anaconda3/lib/python3.8/site-packages/cyvcf2/__init__.py", line 1, in <module>
    from .cyvcf2 import (VCF, Variant, Writer, r_ as r_unphased, par_relatedness,
  File "cyvcf2/cyvcf2.pyx", line 1, in init cyvcf2.cyvcf2
  File "/opt/ohpc/pub/libs/gnu8/numpy/1.15.3/lib64/python3.4/site-packages/numpy/__init__.py", line 142, in <module>
    from . import add_newdocs
  File "/opt/ohpc/pub/libs/gnu8/numpy/1.15.3/lib64/python3.4/site-packages/numpy/add_newdocs.py", line 13, in <module>
    from numpy.lib import add_newdoc
  File "/opt/ohpc/pub/libs/gnu8/numpy/1.15.3/lib64/python3.4/site-packages/numpy/lib/__init__.py", line 8, in <module>
    from .type_check import *
  File "/opt/ohpc/pub/libs/gnu8/numpy/1.15.3/lib64/python3.4/site-packages/numpy/lib/type_check.py", line 11, in <module>
    import numpy.core.numeric as _nx
  File "/opt/ohpc/pub/libs/gnu8/numpy/1.15.3/lib64/python3.4/site-packages/numpy/core/__init__.py", line 26, in <module>
    raise ImportError(msg)
ImportError:
Importing the multiarray numpy extension module failed.  Most
likely you are trying to import a failed build of numpy.
If you're working with a numpy git repo, try `git clean -xdf` (removes all
files not under version control).  Otherwise reinstall numpy.

Original error was: 
cannot import name 'multiarray' from partially initialized module 'numpy.core' (most likely due to a circular import) (/opt/ohpc/pub/libs/gnu8/numpy/1.15.3/lib64/python3.4/site-packages/numpy/core/__init__.py)

I have install numpy package:

pip install numpy

the output of the above command:

Requirement already satisfied: numpy in /opt/ohpc/pub/libs/gnu8/numpy/1.15.3/lib64/python3.4/site-packages (1.15.3)

Can anyone please help me out with this.

Thank You.

numpy snp vcf vcfstats
• 4,676 views • link
written by rheab1230 • rheab1230

In my experience, mixing pip with conda hasn't always played out well. You may want to conda install numpy to make sure everyone knows where everyone else lives.

• 0 views • link
written by Ram Ram

I did the above. but I am still getting error.

    Traceback (most recent call last):
  File "/opt/ohpc/pub/libs/gnu8/numpy/1.15.3/lib64/python3.4/site-packages/numpy/core/__init__.py", line 16, in <module>
    from . import multiarray
ImportError: cannot import name 'multiarray' from partially initialized module 'numpy.core' (most likely due to a circular import) (/opt/ohpc/pub/libs/gnu8/numpy/1.15.3/lib64/python3.4/site-packages/numpy/core/__init__.py)

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/kxj190026/anaconda3/bin/vcfstats", line 5, in <module>
    from vcfstats import main
  File "/home/kxj190026/anaconda3/lib/python3.8/site-packages/vcfstats/__init__.py", line 9, in <module>
    from cyvcf2 import VCF
  File "/home/kxj190026/anaconda3/lib/python3.8/site-packages/cyvcf2/__init__.py", line 1, in <module>
    from .cyvcf2 import (VCF, Variant, Writer, r_ as r_unphased, par_relatedness,
  File "cyvcf2/cyvcf2.pyx", line 1, in init cyvcf2.cyvcf2
  File "/opt/ohpc/pub/libs/gnu8/numpy/1.15.3/lib64/python3.4/site-packages/numpy/__init__.py", line 142, in <module>
    from . import add_newdocs
  File "/opt/ohpc/pub/libs/gnu8/numpy/1.15.3/lib64/python3.4/site-packages/numpy/add_newdocs.py", line 13, in <module>
    from numpy.lib import add_newdoc
  File "/opt/ohpc/pub/libs/gnu8/numpy/1.15.3/lib64/python3.4/site-packages/numpy/lib/__init__.py", line 8, in <module>
    from .type_check import *
  File "/opt/ohpc/pub/libs/gnu8/numpy/1.15.3/lib64/python3.4/site-packages/numpy/lib/type_check.py", line 11, in <module>
    import numpy.core.numeric as _nx
  File "/opt/ohpc/pub/libs/gnu8/numpy/1.15.3/lib64/python3.4/site-packages/numpy/core/__init__.py", line 26, in <module>
    raise ImportError(msg)
ImportError:
Importing the multiarray numpy extension module failed.  Most
likely you are trying to import a failed build of numpy.
If you're working with a numpy git repo, try `git clean -xdf` (removes all
files not under version control).  Otherwise reinstall numpy.

Original error was: cannot import name 'multiarray' from partially initialized module 'numpy.core' (most likely due to a circular import) (/opt/ohpc/pub/libs/gnu8/numpy/1.15.3/lib64/python3.4/site-packages/numpy/core/__init__.py)
• 0 views • link
written by rheab1230 • rheab1230

Does vcfstats have a github repo? You may want to browse through and if necessary, open an issue there.

• 0 views • link
written by Ram Ram

Yes, it has. I will try to open an issue there.

• 0 views • link
written by rheab1230 • rheab1230

Hello, I am trying to run vcfstats. the command:

vcfstats --vcf GEUVADIS.chr1.genotype.vcf.gz --outdir new --formula 'COUNT(1) ~ CONTIG' --title 'Number of variants on each chromosome' --config config.toml

the error:

[2021-08-04 09:37:30,895 INFO] 3003378 variants read.
[2021-08-04 09:37:30,896 INFO] [T] Summarizing aggregations ...
[2021-08-04 09:37:30,931 INFO] [T] Composing R code ...
[2021-08-04 09:37:30,956 INFO] [T] Running R code to plot ...
[2021-08-04 09:37:30,956 INFO] [T] Data will be saved to: new/T.txt
[2021-08-04 09:37:30,956 INFO] [T] Plot will be saved to: new/T.col.png

Its creating two new files T.txt and T.plot.R but T.col.png is not getting generated. Can you please help me out with this.

• 0 views • link
written by rheab1230 • rheab1230

I don't see an error message in the output you posted above. Is that all the messages the command printed out?

• 0 views • link
written by Ram Ram

There is no error. But the final file containing the plot is not getting generated.

• 0 views • link
written by rheab1230 • rheab1230

There should be an error message. What is the program exit code? You will need to run the program again and immediately after it's done, run echo $?. Do this:

vcfstats --vcf GEUVADIS.chr1.genotype.vcf.gz --outdir new --formula 'COUNT(1) ~ CONTIG' --title 'Number of variants on each chromosome' --config config.toml; echo $?

Also, what's the content of T.plot.R?

• 0 views • link
written by Ram Ram

Content of T.plot.R

require('ggplot2')
set.seed(8525)
figtype = 'col'

plotdata = read.table(paste0('new/T', '.txt'),
                        header = TRUE, row.names = NULL, check.names = FALSE, sep = "       ")
cnames = make.unique(colnames(plotdata))
colnames(plotdata) = cnames

bQuote = function(s) paste0('`', s, '`')

png(paste0('new/T', '.', figtype, '.png'),
    height = 2000, width = 2000, res = 300)
if (length(cnames) > 2) {
    aes_for_geom = aes_string(fill = bQuote(cnames[3]))
    aes_for_geom_color = aes_string(color = bQuote(cnames[3]))
    plotdata[,3] = factor(plotdata[,3], levels = rev(unique(as.character(plotdata[,3]))))
} else {
    aes_for_geom = NULL
    aes_for_geom_color = NULL
}
p = ggplot(plotdata, aes_string(y = bQuote(cnames[1]), x = bQuote(cnames[2])))
xticks = theme(axis.text.x = element_text(angle = 60, hjust = 1))
if (figtype == 'scatter') {
    p = p + geom_point(aes_for_geom_color)
# } else if (figtype == 'line') {
#       p = p + geom_line(aes_for_geom)
} else if (figtype == 'bar') {
    p = ggplot(plotdata, aes_string(x = bQuote(cnames[2])))
    p = p + geom_bar(aes_string(fill = bQuote(cnames[1]))) + xticks
} else if (figtype == 'col') {
    p = p + geom_col(aes_for_geom) + xticks
} else if (figtype == 'pie') {
    library(ggrepel)
    if (length(cnames) > 2) {
        p = p + geom_col(aes_for_geom) + coord_polar("y", start=0) +
            geom_label_repel(
                aes_for_geom,
                y = cumsum(plotdata[,1]) - plotdata[,1]/2,
                label = paste0(unlist(round(plotdata[,1]/sum(plotdata[,1])*100,1)), '%'),
                show.legend = FALSE)
        plotdata[,1] = factor(plotdata[,1], levels = rev(unique(as.character(plotdata[,1]))))
        fills = rev(levels(plotdata[,1]))
        sums  = sapply(fills, function(f) sum(plotdata[,1] == f))
        p = ggplot(plotdata, aes_string(x = bQuote(cnames[2]))) +
                    geom_bar(aes_string(fill = bQuote(cnames[1]))) + coord_polar("y", start=0) +
                    geom_label_repel(
                        inherit.aes = FALSE,
                        data = data.frame(sums, fills),
                        x = 1,
                        y = cumsum(sums) - sums/2,
                        label = paste0(unlist(round(sums/sum(sums)*100,1)), '%'),
                        show.legend = FALSE)
            }
        p = p + theme_minimal() + theme(axis.title.x = element_blank(),
                axis.title.y = element_blank(),
                axis.text.y =element_blank())
} else if (figtype == 'violin') {
    p = p + geom_violin(aes_for_geom) + xticks
} else if (figtype == 'boxplot') {
    p = p + geom_boxplot(aes_for_geom) + xticks
} else if (figtype == 'histogram' || figtype == 'density') {
    plotdata[,2] = as.factor(plotdata[,2])
    p = ggplot(plotdata, aes_string(x = bQuote(cnames[1])))
    params = list(alpha = .6)
    if (cnames[2] != '1') {
        params$mapping = aes_string(fill = bQuote(cnames[2]))
    }
    p = p + do.call(paste0("geom_", figtype), params)
} else if (figtype == 'freqpoly') {
    plotdata[,2] = as.factor(plotdata[,2])
    p = ggplot(plotdata, aes_string(x = bQuote(cnames[1])))
    if (cnames[2] != '1') {
        params$mapping = aes_string(color = bQuote(cnames[2]))
    }
    p = p + do.call(paste0("geom_", figtype), params)
} else {
    stop(paste('Unknown plot type:', figtype))
}
p = p + scale_x_discrete(name ="Chromosome", \
    limits=c("1","2","3","4","5","6","7","8","9","10","X")) + \
    ylab("# Variants")ls
print(p)
dev.op()
• 0 views • link
updated by Ram Ram • written by rheab1230 • rheab1230

This looks like code to create the plot. I do see a bunch of problems with the code (which could be copy-paste issues) - can you upload the file to a GitHub gist instead of copy-pasting it here? Make sure to upload the file as is, not copy-paste it to the gist.

• 0 views • link
written by Ram Ram

Thanks. The ylab(...)ls part stands out to me. Are you using a config file or somehow supplying a --ggs value?

Plus, see the block in the gist under figtype=='pie' (lines 34-59, especially line 43) and how it's missing in your comment above, making the p = p+ line above it meaningless? It is probably a copy paste error - please be more careful in the future, as these errors can be insanely hard to detect when they're even a tiny bit less obvious.

• 0 views • link
written by Ram Ram

I am sorry for that. I will definitely be careful next time. Yes, I am providing a config file.

• 0 views • link
written by rheab1230 • rheab1230

Do you mention any ggplot parameters in the config file?

• 0 views • link
written by Ram Ram 
passed = true

[[one]]
formula = 'DEPTHs{0} ~ CHROM'
title = 'Depth distribution on each chromosome'
ggs = 'theme_minimal()'
devpars = {width = 1000, height = 1000, res = 100}

[[one]]
formula = 'AAF ~ CHROM'
title = 'Allele frequency distribution on each chromosome'
ggs = 'theme_bw()'
devpars = {width = 2000, height = 2000, res = 300}
• 0 views • link
written by rheab1230 • rheab1230

That's the exact content from their example in the manual, so it should work. This is getting to a point where the developer would be the best person to help out, so email them or open an issue on github.

• 0 views • link
written by Ram Ram

Yes, I have contact the developer regarding this.

• 0 views • link
written by rheab1230 • rheab1230

I also have one more doubt. I am trying to run this command:

 vcfstats --vcf allfiles1.vcf.gz --outdir new/ --formula 'COUNT(1, VARTYPE[snp]) ~ SUBST[A>T,A>G,A>C,T>A,T>G,T>C,G>A,G>T,G>C,C>A,C>T,C>G]' --title 'Number of substitutions of SNPs' --config config.toml

I am getting this error:

Traceback (most recent call last):
  File "/home1/08259/kjoshi/miniconda3/bin/vcfstats", line 8, in <module>
    sys.exit(main())
  File "/home1/08259/kjoshi/miniconda3/lib/python3.8/site-packages/vcfstats/cli.py", line 156, in main
    load_config(opts['config'], opts)
  File "/home1/08259/kjoshi/miniconda3/lib/python3.8/site-packages/vcfstats/cli.py", line 138, in load_config
    def_devpars = default_devpars.copy()
AttributeError: 'Namespace' object has no attribute 'copy'

I downloaded and updated the software to latest version.

• 0 views • link
written by rheab1230 • rheab1230

0 answers

No answers yet.

Log in to answer this question.

More posts like this